(a) A prospective licensee may apply to AFS for one or more licenses specified in subsection (b) of this section. Beginning June 1, 2020, a prospective container manufacturer may apply to AFS for a container manufacturer registration specified in subsection (d) of this section. Prior to June 1, 2020, container manufacturers must be licensed as Category A, A1, or A2 in order to manufacture containers in the state of Texas. Fees required to be paid shall be those established by the Commission and in effect at the time of application or renewal and shall be paid at the time of application or renewal.
(b) The license categories and fees are as follows.
  (1) A Category A license for container assembly and repair authorizes the assembly, repair, installation, subframing, testing, and sale of ASME or DOT LP-gas containers, including LP-gas motor or mobile fuel containers and systems, and the repair and installation of transport and transfer systems. A Category A license includes all activities covered by a Category A1 and Category A2 license. The original license fee is $1,000; the renewal fee is $600.
  (2) A Category A1 license for ASME container assembly and repair authorizes the assembly, repair, installation, testing, and sale of ASME containers, including LP-gas motor or mobile fuel containers and systems, and the repair and installation of transport and transfer systems. The original license fee is $1,000; the renewal fee is $600.
  (3) A Category A2 license for U.S. Department of Transportation (DOT) container assembly and repair authorizes the assembly, repair, installation, subframing, testing, and sale of LP-gas DOT containers, including LP-gas motor or mobile fuel containers and systems, and the repair and installation of transport and transfer systems. The original license fee is $1,000; the renewal fee is $600.
  (4) A Category B license for transport outfitters authorizes the subframing, testing, and sale of LP-gas transport containers, the testing of LP-gas storage containers, the installation, testing, and sale of LP-gas motor or mobile fuel containers and systems, and the installation and repair of transport systems and motor or mobile fuel systems. The original license fee is $400; the renewal fee is $200.
  (5) A Category C license for carriers authorizes the transportation of LP-gas by transport, including the loading and unloading of LP-gas, and the installation and repair of transport systems. The original license fee is $1,000; the renewal fee is $300.
  (6) A Category D license for general installers and repairmen authorizes the sale, service, and installation of containers, and the service, installation, and repair of piping and appliances. A Category D license does not authorize the installation of motor fuel containers, motor fuel systems, recreational vehicle containers, or recreational vehicle systems. The original license fee is $100; the renewal fee is $70. Persons with certain licenses issued by the Texas State Board of Plumbing Examiners or the Texas Department of Licensing and Regulation may register with AFS as described in §9.13 of this title (relating to General Installers and Repairman Exemption).
  (7) A Category E license for retail and wholesale dealers authorizes the storage, sale, transportation, and distribution of LP-gas at retail and wholesale dealers, and all other activities included in this section, except the manufacture, fabrication, assembly, repair, subframing, and testing of LP-gas containers, and except the sale and installation of LP-gas motor or mobile fuel systems that service an engine with a rating of more than 25 horsepower. The original license fee is $750; the renewal is $300.
  (8) A Category F license for cylinder filling authorizes the operation of a cylinder filling facility, including cylinder filling, the sale of LP-gas in cylinders, and the replacement of cylinder valves. The original license fee is $100; the renewal fee is $50.
  (9) A Category G license for dispensing stations authorizes the operation of LP-gas dispensing stations filling ASME containers designed for motor or mobile fuel. The original license fee is $100; the renewal is $50.
  (10) A Category H license for cylinder dealers authorizes the transportation and sale of LP-gas in cylinders. The original license fee is $1,000; the renewal is $300.
  (11) A Category I license for service stations and cylinder filling authorizes any cylinder activity set out in Category F and dispensing station operations set out in paragraph (9) of this subsection. A Category I license does not authorize the transportation of LP-gas. The original license fee is $150; the renewal is $70.
  (12) A Category J license for service stations and cylinder facilities authorizes the operation of a cylinder filling facility, including cylinder filling and the sale, transportation, installation, and connection of LP-gas in cylinders, the replacement of cylinder valves, and the operation of an LP-gas service station as set out in Category G. The original license fee is $1,000; the renewal is $300.
  (13) A Category K license for distribution systems authorizes the sale and distribution of LP-gas through mains or pipes, and the installation and repair of LP-gas systems. The original license fee is $1,000; the renewal is $300.
  (14) A Category L license for engine and mobile fuel authorizes the sale and installation of LP-gas motor or mobile fuel containers, and the sale and installation of LP-gas motor or mobile fuel systems over 25 horsepower. The original license fee is $100; the renewal is $50.
  (15) A Category M license for recreational vehicle installers and repairmen authorizes the sale, service, and installation of recreational vehicle containers, and the installation, repair, and service of recreational vehicle appliances, piping, and LP-gas systems, including recreational vehicle motor or mobile fuel systems and containers. The original license fee is $100; the renewal is $70.
  (16) A Category N license for manufactured housing installers and repairmen authorizes the service and installation of containers that supply fuel to manufactured housing, and the installation, repair, and service of appliances and piping systems for manufactured housing. The original license fee is $100; the renewal is $70.
  (17) A Category O license for testing laboratories authorizes the testing of LP-gas containers, LP-gas motor fuel systems or mobile fuel systems, transfer systems, and transport systems for the purpose of determining the safety of the containers or systems for LP-gas service, including the necessary installation, disconnection, reconnection, testing, and repair of LP-gas motor fuel systems or mobile fuel systems, transfer systems, and transport systems involved in the testing of containers. The original license fee is $400; the renewal is $100.
  (18) A Category P license for portable cylinder exchange authorizes the operation of a portable cylinder exchange service, where the sale of LP-gas is within a portable cylinder with an LP-gas capacity not to exceed 21 pounds, where the portable cylinders are not filled on site, and where no other LP-gas activity requiring a license is conducted. The original license fee is $100; the renewal fee is $50.
(c) A military service member, military veteran, or military spouse shall be exempt from the original license fee pursuant to the requirements in §9.14 of this title (relating to Military Fee Exemption). An individual who receives a military fee exemption is not exempt from renewal or transport registration fees specified in §9.7 and §9.202 of this title (relating to Applications for Licenses, Manufacturer Registrations, and Renewals; and Registration and Transfer of LP-Gas Transports or Container Delivery Units, respectively).
(d) A container manufacturer registration authorizes the manufacture, assembly, repair, subframing, testing and sale of LP-gas containers. The original registration fee is $1,000; the renewal fee is $600.
(e) Repair to a US DOT cylinder or cargo tank is defined in 49 CFR §§180.203, 180.403 and 180.413. Changes made to or maintenance of a cylinder or cargo tank excluded from the definition of repair in 49 CFR §§180.203, 180.403 and 180.413 do not require a license.

Source Note: The provisions of this §9.6 adopted to be effective February 1, 2001, 26 TexReg 947; amended to be effective September 1, 2005, 30 TexReg 4810; amended to be effective December 24, 2012, 37 TexReg 9913; amended to be effective January 4, 2016, 41 TexReg 238; amended to be effective January 6, 2020, 45 TexReg 127; amended to be effective July 18, 2022, 47 TexReg 4119